When the stainless steel elbow is installed, the stainless steel elbow can be directly installed on the pipe according to the connection mode, and installed according to the use position.In general, it can be installed anywhere in the pipe, but it must be easy to inspect the operation.  
Note THAT THE MEDIUM FLOW FOR THE CUT STAINLESS STEEL ELBOW IS FROM THE BOTTOM TO THE top OF THE LONGITUDINAL DISC. Stainless STEEL ELBOW can only be installed horizontally.When installing the stainless steel elbow, pay attention to sealing to prevent leakage and affect the normal operation of the pipeline.  Stainless steel elbow has an important role and value in installation and use, and has good performance in certain environment and media.  
Stainless steel elbow should be inspected as planned.The exposed processing surface should be kept clean, clean of dirt, and stored in a clean and dry place indoors.  
Do not stack or store in the open air. Stainless steel elbow ball valves, globe valves, gate valves are only for fully open or fully closed.  It is not allowed to adjust the flow rate to avoid corrosion of the sealing surface and accelerated wear. Long-term storage of stainless steel elbow should be regularly checked.The exposed working surface should be kept clean and clean of dirt. Elbows should be stored in a dry and ventilated place in sequence.  
It is strictly prohibited to stack and store in the open air. Stainless steel elbow should be kept dry, ventilated, clean, tidy, and stored in the correct way.